-
We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.
David's latest activity
-
David replied to the thread V1 DIY Front End Alignment.Ok let me know if I screwed up or if its a good starting point. Caster LF 8.01 RF 8.15 Front Camber FL -.7... -
-
You can try even and see if it drives straight. It might. On the other hand, a few tenths of a degree isn’t going to mess up autocross.
-
David replied to the thread V1 DIY Front End Alignment.I was trying to leave it even as road crown on track and AutoX I believe wouldn't help. I guess now no option
-
David replied to the thread V1 DIY Front End Alignment.Thank you for your help.
-
since we are not using high $$$ alignment machines, whatever method you use, that’s what you stick with And why some of our numbers are...
-
David replied to the thread V1 DIY Front End Alignment.Got it, not sure if I'm doing something wrong or if something is off. Im doing the 20⁰ method and I have the FL at +8.15⁰ and the hub is...
-
David replied to the thread V1 DIY Front End Alignment.That makes more sense so the 20⁰ is accurate both ways. Now im assuming Ill use the 20⁰ method and give it a +8⁰ to +9⁰ caster
-
David replied to the thread V1 DIY Front End Alignment.@Rttoys if i use your method 20⁰ and zeroing I get 4.4⁰. If i use the 20⁰ method and the equation I get 6.15⁰. Shouldn't it be the same?
-
David replied to the thread V1 DIY Front End Alignment.I made new adapter that bolt on to the center cap on the wheels. I wanted to eliminate that play also.
-
-
David replied to the thread V1 DIY Front End Alignment.Same 4.4
-
David replied to the thread V1 DIY Front End Alignment.-4.5
-
David replied to the thread V1 DIY Front End Alignment.Ok that a little closer to DF measurement which is 8.5 still not close. Which way is better and more accurate? Why the difference?
-
David replied to the thread V1 DIY Front End Alignment.FL at zero I have +.1 arrow going down, 20⁰ in - 1.7 arrow going up, 20⁰ out +2.6 arrow going down.
-
-
David replied to the thread V1 DIY Front End Alignment.Great question I have a Klein 935DAG doesn't display a + or - just has an arrow up or down...
-
David replied to the thread V1 DIY Front End Alignment.Ok so I started with the alignment and im stuck already. 1st thing I want to do is the caster but im getting mixed numbers because the...
