Search results

Problem solved! After a bunch of jacking up various corners and turning/moving things, it turns out the noise was coming from the steering rack replacement bolts: A little spray of WD-40 and some torque quieted it right up. Glad it wasn't my diff!

Hey all. I've noticed a fairly loud creaking noise coming from the back of the car when turning at slow speeds. It's very easy to replicate. If I turn the front wheels either direction, and simply roll the car in neutral a few inches forwards or backwards, it makes the noise. The noise does not...

@Lethalcast was successful, and as of Jan. 7th, mine is registered in Florida as well. I went the route of ASPT or assembled from parts. Just follow the instructions in TL-41. There's a checklist at the end. You will need: to fill out an application for a title have the title for the donor car...

Yes. After I switched the plugs, the speedometer worked, but the ECT was still not reading on the gauge cluster. I pulled the negative battery cable off for a few minutes and when I reconnected it the temperature was displayed.

The car wouldn't crank or start. You can read the progression here: http://dfkitcar.com/forum/index.php?threads/first-start-no-crank-condition.789/post-16584 Separately, my OBDII scanner would not connect to the car and during my first drive my speedometer and coolant temps didn't work. I'm...

These are the Braum Venom seats. Tallest seats Braum sells. Not too hard to install and comfortable. They can be quite a bit cheaper than on the Braum website if you look around a little.

So, it's been over a year since I have last updated this thread. Lots of progress has been made though! The car is running and driving. I still need to install headlights and the windshield to be ready for registration, and there are a bunch of little other things I want to do. Here are a few...

I had issues and thought I needed a new ECM as well. I bought one and then determined it was an unseated plug in my BCM. I still have the ECM and have no plans to use it if you still need one.

Just fixed this on mine. The engine coolant and speed sensor plugs and both 2 pin and fairly close to each other. I had them swapped. You need to reset the ECU for it to be able to read engine temp again if anyone else has this problem. Makes an enormous power difference too...

Did you ever figure this out? I have RPM, lights etc., but no speed or water temp.

Just talked to Lonny, and it sounds like their hardware vendor messed up and I got the wrong parts. They are all supposed to be right hand thread for anyone else that has this issue.

So I can't install these parts like this because all of my rod ends are left hand threads. They only thread on to one end of the rods on the top in this photo, and don't thread onto either end of the shift cables. Something isn't right.

Thanks!

Anyone have a nice clear photo of how this linkage is supposed to go using the new attachment method? All of my little rod ends (circled in red) are internally left hand thread, there wasn't enough hardware to use the right hand threaded end of the little rods to attach to the stock shifter (I...

This is for an 09 SS/TC. Not sure if the others look the same.

Problem solved! It was simple, but not obvious. BCM X2. The little green plastic slider piece inside it was bent somehow, and that prevented it from fully seating. When connecting it, the lever slides and locks, and you can feel the plug get pulled into the BCM. From the top it looks fully...

I do. I will see if I can at least connect to the ECM, but as Brian mentioned I won't be able to disable the VATS.

Yep, I called it the key reader in the above post, but yes I checked all those and everything was good.

So after Lonny's reply, I called him. My security light does not shut off after a few seconds. He recommended I turn the key on and wait 10 minutes for the light to go off and reset the key. My car does not do this, the light stays on all the time, so it sounds like there is an issue with the...

I might take you up on this if I can't figure it out here pretty soon. It's an 09 SS/TC. I just bought an ECM on eBay and some key blanks on Amazon. Appreciate the offer though. Hopefully the procedure here to erase and reset the keys will work (and the car starts). I'll keep trying things...