Really!

[Bruce]

First pink wire I cut is the wrong one, seems negative reinforcement is my middle name, thank god for Rock Auto, good night all.

 

[Karter2026]

First pink wire I cut is the wrong one, seems negative reinforcement is my middle name, thank god for Rock Auto, good night all.

Oh don't worry you are not the only one. I did it with the old videos worked through video #1. I was two minutes in to video 2 Lonny said find your brake reservoir plug. I searched the harness for a while. Then I looked in the cut off bucket sure enough there it was.

 

[jennam]

Yup. Everyone cuts at least one connector they need.

 

[Mayor West]

My advice is to watch a video or two ahead of the one you're working on, because Lonny jumps around and references things not mentioned in previous videos which can lead to confusion. If he doesn't say to cut a wire, don't cut it. He eventually gets to everything by the end of the stripping process. I made multiple mistakes in mine.

Another bit of advice is always leave a lil bit of wire attached to each connector you remove in case you have to re-solder them back in.

 

[k.rollin]

Yup. Everyone cuts at least one connector they need.

Yeah, I worked from the old harness videos while hanging out with my buddies and drinking; ended up cutting out the connector between the engine and main harness