Scott Geyer
Well-Known Member
- Scott Geyer Well-Known Member
Any suggestions on a good performance muffler?
-
We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.
Aftermarket Muffler
Rttoys
Smokin' Goblin
- Rttoys Smokin' Goblin
Some people want to be different.
I cut up a motorcycle muffler (2000 ninja 600) and made an adaptor to fit the goblin. I currently have the stock goblin muffler on now, due to a “mishap” to my other one, involving a little too much packing and an explosion, due to too much back pressure. It’s a fun beer story.
I cut up a motorcycle muffler (2000 ninja 600) and made an adaptor to fit the goblin. I currently have the stock goblin muffler on now, due to a “mishap” to my other one, involving a little too much packing and an explosion, due to too much back pressure. It’s a fun beer story.
Attachments
Towerdog
Goblin Guru
- Towerdog Goblin Guru
Im "planning" on splitting to two pipes then into two street bike mufflers.Some people want to be different.
I cut up a motorcycle muffler (2000 ninja 600) and made an adaptor to fit the goblin. I currently have the stock goblin muffler on now, due to a “mishap” to my other one, involving a little too much packing and an explosion, due to too much back pressure. It’s a fun beer story.
Desert Sasqwatch
Bigfoot Goblin
- Desert Sasqwatch Bigfoot Goblin
What muffler? That's a bump in the exhaust pipe. 
It will definitely be louder, probably Racer Boi loud. Maybe you should have put one of these in the pipe too, makes a big difference taking the really harsh tones out.
It will definitely be louder, probably Racer Boi loud. Maybe you should have put one of these in the pipe too, makes a big difference taking the really harsh tones out.
ZZPerformance 3" Vortex Cone Exhaust Sound Reducer Pipe Muffler Insert | eBay
ZZPerformance 3" Exhaust Cone Insert. Then if you you still think it is too loud we make custom small resonator to place in tighter spots like the downpipe. Then if it's about right, but want to make it even a little quieter we started using these cone inserts.
www.ebay.com
Zklonne
Member
- Zklonne Member
Just a cheapie with virtually no baffles. More for the pointless argument of “look officer there is a muffler”, before he writes me a ticket anyway. Lol I wanted to retain as much length as possible compared to the previous assembly, but if it is still too Racer Boi sounding I’ll definitely grab one of those cone inserts. Isn’t the whole point of a goblin to sound like a riced civic but race like a lambo?
www.speedwaymotors.com
Speedway Shorty Race Muffler, 6 x 3 Inch
These shorty race mufflers are useful when the rules say you must run a muffler, but do not specify a noise level. All steel construction with no fillers to burn out. Best for use without decibel requirement 6" x 3" x 3"
Desert Sasqwatch
Bigfoot Goblin
- Desert Sasqwatch Bigfoot Goblin
I haven't seen on of those since high school - which was a REALLY long time ago.
YoungGun
Active Member
- YoungGun Active Member
Some people want to be different.
I cut up a motorcycle muffler (2000 ninja 600) and made an adaptor to fit the goblin. I currently have the stock goblin muffler on now, due to a “mishap” to my other one, involving a little too much packing and an explosion, due to too much back pressure. It’s a fun beer story.
You still using this? Do you have a video of your exhaust setup? Curious how it sounds lol.
comegetjoe
Goblin Guru
- comegetjoe Goblin Guru
Whistle go WOOWOO!
You supposed to be up cookin breakfast!
Rttoys
Smokin' Goblin
- Rttoys Smokin' Goblin
Ror. I found the dipstick. It landed in the passenger seat. Haha
I used it for a while. It was a little louder than the stock DF one, so one day I decided to add packing to quiet it a little. Something happened and I plugged the exhaust, causing a ton of backpreuure until it exploded, sending the internals to the muffler everywhere and the oil dipstick shooting out the front, along with oil.
It’s on my bench in “reconstruction” phase. Haha
