• We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.

V1 Anyone make these?

WA08TC
Ugh, yeah they are too long.... :(
Screenshot_20251211-102822.png
Something this size 4.5" to 6" adjustment?
Can I ask what is the hope for adjusting the wing angle?
I hear 10° is a good ballpark.
 
WA08TC
Downforce vs drag. That's just what I've heard not an expert by anymeans. Unless you were asking something else and I misconstrued it.
 
G
Downforce vs drag. That's just what I've heard not an expert by anymeans. Unless you were asking something else and I misconstrued it.
I think you are wasting your time trying to put an adjustable wing on a Goblin. For the most part the air is too turbulent to get downforce, and you don't have any way to measure either downforce or drag to make adjustments.
 
WA08TC
I agree it's more for looks than anything with the turbulent air in the rear. The adjustable rods ends was to keep the rake the same from old wing mounts to new.
 
Desert Sasqwatch
@Gtstorey - already done, it's in my build log a few pages back from the most recent posts. Roof mounted wing set at about 8 degrees normally and rotates up to about 52 degrees with a signal from the brakes for active aero braking that helps push the rear of the car down to counter act nose dive. Come on man, keep up with the trends!!! :p:D
 
G
@Gtstorey - already done, it's in my build log a few pages back from the most recent posts. Roof mounted wing set at about 8 degrees normally and rotates up to about 52 degrees with a signal from the brakes for active aero braking that helps push the rear of the car down to counter act nose dive. Come on man, keep up with the trends!!! :p:D
I few pages back on your log might be a year, can't remember them all for that long.

Yep, it's been almost a 1-1/2 years.
 
Indy Lonnie
Did this a while ago…
 
Back
Top