V1 Automatic shifter install?

[229garage]

Hey I have a dumb question. I'm trying to install the shifter on the goblin I'm working on and it has a automatic transmission. How do I attach the linkage from the cable to the shifter? I see it sits on the pin of the shifter itself and I assume it bolts to the cable bit I'm not sure. Any help is much appreciated thanks

 

[Joebob]

Show some pictures of the specific problem. Going by memory, the cable housing clips to the underside of the tunnel cover, the shifter has a white plastic shaft replaced by a metal bar and aluminum spacers that reverses the direction. The shifter cable end is then bolted to the bottom hole in the shifter bar through some soft orange plastic. Pick the side that lines up the best with the shifter bolted to the tunnel top. Can't find my posted pictures in some one else's build log.

Joe