Exhaust Flange Identification

[Corey]

Hey guys, can anyone give me a description to search for this flange? I found the pic on zzp but no description?

 

[Desert Sasqwatch]

LNF O2 pipe outlet mating flange - 4 bolt, is how I describe it.

 

[Desert Sasqwatch]

I made my own flange from 1/4 inch stainless plate - 6X8 bought off ebay for about $12. But I also have the 3 inch hole saw and drill press to make accurate holes - and patience to fabricate from stainless steel, it's tough stuff.

Edit, this is the finished flange installed on my exhaust.

 

[Corey]

Very nice!

 

[Corey]

I made my own flange from 1/4 inch stainless plate - 6X8 bought off ebay for about $12. But I also have the 3 inch hole saw and drill press to make accurate holes - and patience to fabricate from stainless steel, it's tough stuff.

Edit, this is the finished flange installed on my exhaust.

You made me realize I got a spare I can cannibalize that came with the car!

 

[Desert Sasqwatch]

Great thinking, save yourself some $$ to spend on something else!

 

[SeanH]

I used this.

WERKSracing LNF/LDK/LHU K04 Turbo 4 bolt Flange, Performance Autowerks

www.performanceautowerks.com

flange off the turbo instead of the cast iron piece your looking for. different idea if it helps?

welded two O2 bungs (one for wideband and future gauge) and 90-degree pipe with a v band. can post a picture in a few from my phone

 

[Chris_WNC]

I used this.

WERKSracing LNF/LDK/LHU K04 Turbo 4 bolt Flange, Performance Autowerks

www.performanceautowerks.com

flange off the turbo instead of the cast iron piece your looking for. different idea if it helps?

welded two O2 bungs (one for wideband and future gauge) and 90-degree pipe with a v band. can post a picture in a few from my phone

I'd like to see your setup. I'll need to do something similar soon.

 

[SeanH]

I'd like to see your setup. I'll need to do something similar soon.

They offer a precut gasket for it, I just cut my own and used copper spray gasket on both sides of it as well

I have it mounted already just don’t have a picture of it, the pictures in post are of it just on there loose. Mounted now I have it slightly angled down to allow any moisture to drain out

 

[UNFORGIVABLE]

They offer a precut gasket for it, I just cut my own and used copper spray gasket on both sides of it as well

I have it mounted already just don’t have a picture of it, the pictures in post are of it just on there loose. Mounted now I have it slightly angled down to allow any moisture to drain out

This looks awesome! I plan on doing this in the next few weeks. Can I ask how the sound level is? Too loud? just right?

 

[Gtstorey]

This looks awesome! I plan on doing this in the next few weeks. Can I ask how the sound level is? Too loud? just right?

That will all depend on what your noise tolerance is. I guarantee it's too loud for me.

 

[SeanH]

This looks awesome! I plan on doing this in the next few weeks. Can I ask how the sound level is? Too loud? just right?

its loud for sure! but I like it loud for the experience of it. think 1000cc motorcycle with no muffler

 

[Desert Sasqwatch]

Maybe slip one of these in the end of the pipe to see if it takes the raw edge off the exhaust note? Could be clamped in temporarily to hear if it makes any difference?

Dynatech 772-32520 Vortex Exhaust Pipe Muffler Insert Cone, 3 Inch | eBay

Find many great new & used options and get the best deals for Dynatech 772-32520 Vortex Exhaust Pipe Muffler Insert Cone, 3 Inch at the best online prices at eBay! Free shipping for many products!

www.ebay.com