V1 Redrilled bearing hubs

[Jareth]

May I ask what the definition is of "redrilled bearing hubs" are they used ones that have been "Redrilled" to be used on the Goblin?

.

 

[Ross]

DF will redrill stock 5x110mm hubs over to 5x114.3mm, then we have better wheel selection.

 

[Gtstorey]

Bearing Hub Info (4 lug, 5 lug, ABS) | DF Kit Car Forum

 

[Iwanttogofast]

Have any of you other CNC Machinists attempted to redrill (mill) your own hubs? We're not supposed to do "government work" where I work, but everyone does. I would imagine that as long as you seal off the WSS port, there should be no worry about coolant intrusion - right? The hubs are sealed other than that, I believe. I am considering giving it a shot...

 

[CodyP]

Have any of you other CNC Machinists attempted to redrill (mill) your own hubs? We're not supposed to do "government work" where I work, but everyone does. I would imagine that as long as you seal off the WSS port, there should be no worry about coolant intrusion - right? The hubs are sealed other than that, I believe. I am considering giving it a shot...

People redrill their hubs all the time. DF offers them at a fair price for a new hub and the work is already done. I believe that if you do them yourself you also have to machine the back side flat so that the studs will sit flush. It doesn't look like too difficult of a task if you have the skills.