V1 SOLD - DFKC Shop Car: 2022 SS/SC Open Cage Extended Length - $22,000

[Adam]

SOLD 12-11-2025
Want a Goblin built by the experts?
This supercharged Goblin was built at DFKC headquarters in late 2021 to early 2022. It was built to give us footage for the SS/SC specific instructions. For example: Installing the SS/SC Fuel Line

Why are we selling it?
This car has acted as my personal Goblin since we finished assembling it but I've got another Goblin on the way. Goblins are small, but they still take up valuable shop space so we need to clear out some of them to make room for the future.

What's in the car?
It was built from an SS/SC Cobalt with an unmodified LSJ and F35 (open diff). It is still all stock. It has 149,380 miles on it.

Installed Options

• Footwell cover
• Wing mount set with carbon fiber wing
• Button panel set
• Boost gauge mount with stock boost gauge
• FX1 Pro seats (standard size) with 5 point harnesses
• DFKC anodized shifter (black)
• DFKC quick release steering wheel
• Custom "DF Goblin" branded exhaust
• Rear coilover kit
• 5x114.3 bearing hubs
• Steering rack limiter kit
• Brake proportioning valve kit
• Moog spherical bearings in the rear control arms
• Hood, side panels, and engine cover (vinyl wrapped)

Asking $22,000 for this one

Add-on options:
If you buy either of the following options, we'll do the installation for free before pick up/delivery.

• Tubular subframe kit ($2,975 + $250 for powder coat) - We'll swap out the old parts and install the new subframe, control arms, knuckles, etc.
• Tow Bar Kit ($375) - We'll bolt on the tow bar mounts and add the wiring to the BCM for lights while towing.

Got any questions? Let us know!

 

[ccgillett]

Is there a retrofit kit that allows the halo from the track version to be fitted to the existing open cage?

 

[Adam]

The answer is yes we can add the full cage. However, the powder coat will be removed where we weld and it'll be up to the new owner to paint the new cage and bare areas to match.

 

[ah.b.normal]

The answer is yes we can add the full cage. However, the powder coat will be removed where we weld and it'll be up to the new owner to paint the new cage and bare areas to match.

Ya know, on spots like an added cage maybe just fade to a contrasting color from there up?