V1 Solid mounts install

[jFritzies]

Any thread out there on how the solid mounts for the transmission/motor line up? I’m about to install the subframe tomorrow and I’m not sure how they mount. 2008 LS donor

 

[SmsDetroit]

Leave everything loose until you have bolts in everything lined up. Then start to torque down

 

[SmsDetroit]

Here’s a link from Adam. https://docs.google.com/document/d/1Zr4FoIG1yGS8pdIn_pvkR2bdmMJRSSA2ZgH3cZjrhgk/edit?usp=sharing

 

[Towerdog]

Alot of us has had problems getting them to line up perfectly. Some filing of the bolt holes is common to get them to line up.

 

[jFritzies]

Alot of us has had problems getting them to line up perfectly. Some filing of the bolt holes is common to get them to line up.

Sounds good. I haven’t seen pictures of where they even go but I’ll do some test fitting and figure it out

 

[Towerdog]

Sounds good. I haven’t seen pictures of where they even go but I’ll do some test fitting and figure it out

I'm half way across the country right now so I caint get pictures of them, but they replace the original ones..... the one w 3 holes (triangle) on one end goes in the back and the one w the tube goes in the front.

 

[k.rollin]

Are there solid mounts for the base model donors now? When I did my build, they were only available for the forced induction SS trims.

 

[2.0 Turbo]

Here’s a couple of pictures.

 

[2.0 Turbo]

Here’s a couple of pictures.

 

[Iwanttogofast]

Are there solid mounts for the base model donors now? When I did my build, they were only available for the forced induction SS trims.

I'd like to know, as well. I will more than likely be using a base Cobalt 2.2 5-speed for my donor.

 

[jFritzies]

I'd like to know, as well. I will more than likely be using a base Cobalt 2.2 5-speed for my donor.

Yes the 2021 kits include them for the base manual (which I have)