JBINTX
Goblin Guru
- JBINTX Goblin Guru
2020 DF Goblin Frame #186, and Trailer
This has been a wonderful vehicle to build and own. The Houston Gaggle of Goblins have been an amazingly fun family to run with. I am the builder and only owner. After retirement, I have become addicted to golf. And, a kit plane may be next.
Please scan through the build log links below prior to calling for more info. You need high performance car experience to drive this vehicle at its limits.
Donor was 2009 Cobalt SS turbo
Tuned to 26 psi with docs from fellow Goblin dyno session
Well proven at Houston AutoX over several years
290 hp, 360 ft-lb torque at the wheels
0-60mph in 3.0 sec
2,600 lbs
2G lateral load on slicks
Brake proportioning valve for front brakes
Powdered coated Extended frame with track halo
Slicks have only two AUTOX events on them. Street tires have 70% tread.
Was street legal, but I allowed registration and insurance to end due to lack of driving
Lots more upgraded parts – info available on request
https://dfkitcar.com/forum/threads/jason-in-texas-ext-track-09-ss-tc.1531/
https://dfkitcar.com/builds/goblin-v1-186
https://dfkitcar.com/forum/threads/houston-scca-autocross.2293/
http://dfkitcar.com/forum/threads/tires-and-wheels-list-updated-on-3-25-2020.959/post-31530
Offered with 26 ft fully enclosed 26 ft trailer.
E-track with extra tie downs.
Powered jack
Race ramps
Ratchets and axle straps
New tires
Spare tire and wheel
Bearings serviced
2-5/16” ball hitch, anti-sway bar and load levelers included
Asking $20,000 for the Goblin and $4,000 for the trailer.
$23,000 get you both so you are ready for racing.
This has been a wonderful vehicle to build and own. The Houston Gaggle of Goblins have been an amazingly fun family to run with. I am the builder and only owner. After retirement, I have become addicted to golf. And, a kit plane may be next.
Please scan through the build log links below prior to calling for more info. You need high performance car experience to drive this vehicle at its limits.
Donor was 2009 Cobalt SS turbo
Tuned to 26 psi with docs from fellow Goblin dyno session
Well proven at Houston AutoX over several years
290 hp, 360 ft-lb torque at the wheels
0-60mph in 3.0 sec
2,600 lbs
2G lateral load on slicks
Brake proportioning valve for front brakes
Powdered coated Extended frame with track halo
Slicks have only two AUTOX events on them. Street tires have 70% tread.
Was street legal, but I allowed registration and insurance to end due to lack of driving
Lots more upgraded parts – info available on request
https://dfkitcar.com/forum/threads/jason-in-texas-ext-track-09-ss-tc.1531/
https://dfkitcar.com/builds/goblin-v1-186
https://dfkitcar.com/forum/threads/houston-scca-autocross.2293/
http://dfkitcar.com/forum/threads/tires-and-wheels-list-updated-on-3-25-2020.959/post-31530
Offered with 26 ft fully enclosed 26 ft trailer.
E-track with extra tie downs.
Powered jack
Race ramps
Ratchets and axle straps
New tires
Spare tire and wheel
Bearings serviced
2-5/16” ball hitch, anti-sway bar and load levelers included
Asking $20,000 for the Goblin and $4,000 for the trailer.
$23,000 get you both so you are ready for racing.
Attachments
-
IMG_1884.jpeg90.9 KB · Views: 14 -
IMG_1889.jpeg89.5 KB · Views: 13 -
IMG_1890.jpeg90.3 KB · Views: 13 -
IMG_1891.jpeg57.1 KB · Views: 13 -
IMG_1892.jpeg97.1 KB · Views: 12 -
IMG_1893.jpeg84.1 KB · Views: 11 -
IMG_1894.jpeg92.2 KB · Views: 11 -
IMG_1896.jpeg49.2 KB · Views: 11 -
IMG_1898.jpeg70.7 KB · Views: 12 -
IMG_1899.jpeg95.8 KB · Views: 12 -
IMG_7584.jpg82.6 KB · Views: 12 -
IMG_8151.jpg388.1 KB · Views: 12 -
IMG_9413.jpg521.2 KB · Views: 13 -
Jason Backs at autocross final.jpg274.2 KB · Views: 14 -
LONNYS TUNE OUTPUT.jpeg306 KB · Views: 14