BUILD & PRICE

Golf 1.8T Auto +$0 Golf 1.8T Manual +$500 Golf GTI DSG +$0 Golf GTI Manual +$500

T-Top +$0 Front hoop with two center roof bars running to the main hoop. Open sides keep entry and exit easy. Full Cage +$100 Front hoop with outer halo bars and gussets for added protection. Tighter entry than the T-Top. Full Cage with Roof Bars +$150 The full cage plus two center bars between the front and main hoops.

Easy-Entry +$0 No bars above the upper frame rail to make for easy ingress and egress. Standard Door Bars +$80 An additional bar is added above the upper frame rail to provide more side protection. Full Containment Door Bars +$120 Adds an additional bar above the standard version. Provides the most protection but makes ingress and egress more difficult.

Main Hoop X Brace +$75 Adds a second diagonal to the main hoop to form an X. Default is a single diagonal. Rear Cage X Brace +$75 X brace that ties into the diagonals above the engine for added stiffness.

Plug and Play Body Harness +$375 Instead of reworking the donor harness, this option provides a ready-to-install solution. Proportioning Valve Kit +$250 This kit allows for precise adjustment of front to rear brake bias.

Single Adjustable Coilovers +$0 Standard single adjustable QA1 coilovers on all four corners. Double Adjustable Coilovers +$400 Upgraded QA1 coilovers with independent rebound and compression tuning.

Standard Steering Wheel +$0 Standard bolt-on steering wheel. DFKC Steering Wheel with Quick Release +$205 D shaped wheel with a quick release hub for easy entry and exit.

Standard Air to Air Intercooler System +$0 Air to Water Intercooler System +$475 Front mount heat exchanger, intercooler, water pump, plumbing, and hardware.

Installing Own Aftermarket Seats +$0 Mount your own seats to the seat mount plates already welded to your chassis. FX1 Pro Small with Sliders +$1,495 Pair of seats, 5 point latch and link harnesses, sliders, and mounts. Fits up to a 36 inch waist. FX1 Pro Medium with Sliders +$1,575 Pair of seats, 5 point latch and link harnesses, sliders, and mounts. Fits up to a 38 inch waist. FX1 Pro Large with Sliders +$1,635 Pair of seats, 5 point latch and link harnesses, sliders, and mounts. Fits up to a 42 inch waist.

Parking Brake Kit +$260 Spot calipers, handle kit, cables, and hardware. Highly recommended for manual Goblins.

None +$0 Classic Nose +$900 A three piece nose with the classic Goblin look. AERO Nose +$1,320 A three piece nose with a functional hood extractor for better cooling and downforce.

None +$0 Aluminum +$300 Flat aluminum side panels that rivet to the chassis. Fiberglass +$500 Sculpted fiberglass panels that fit flush to the nose. Fiberglass with Pods +$980 Sculpted panels plus side pods for heat exchangers or cold air intake.

Engine cover +$500 Cleans up the engine bay and adds storage with its flat floor design.

Headlights +$320 5 3/4 inch headlights with mounting hardware. Turn Signal Lights +$120 Front turn signals with mounting hardware. Mirrors +$100 Side mirrors with mounting hardware. Taillights +$140 Turn, brake, and reverse taillights with mounting hardware. License Plate Mount +$30 LED illuminated license plate mount with mounting hardware.

None +$0 Polycarbonate Windscreen +$300 Plastic windscreen with mounting hardware. Good for wind and small debris deflection. Glass Windshield +$800 Safety glass windshield with hardware. Passes stricter inspections, allows wipers, and protects better than the polycarbonate option.

Wing Mount Set +$150 Rear wing mounts with hardware. Wing not included. Dash Panel +$120 Laser cut two piece aluminum dash. Easy to mount aftermarket gauges and switches to.