'06 Saturn Ion Redline donor for sale with HPT

[CajunJeff]

Putting out feelers to sell my '06 Redline. It has 175K miles, needs a bunch of little repairs and at this point, I no longer need it. A lot of small interior stuff needs repairs (sunroof gearbox, window clips, headliner is out) but that wouldn't matter to most folks here. Located in south Louisiana.

Car is a competition package car (LSD diff, gray wheels, LED ladder tach, boost gauge). Mechanically, it needs a timing chain set and an alternator. Shifter bushings are pretty worn out. But it still runs and drives perfectly fine. It has GM stage 2 (42#) injectors with the factory tune. Stock pulley, but I have a Billetflow 3.1" pulley I never put on. Has urethane motor/trans mounts. Comes with a copy of HPTuners and the MVPI Pro interface.

Mechanically, it's the same as a Cobalt SS/SC, but the wiring harness is slightly different, so there will likely be some adjustments needed to use the harness in a Goblin. I could sell it on Facebook or something, but it really would be ideal for something like this.

Asking $1500, I'd like to see this go towards someone building something cool than it just getting parted out by a wholesaler.

 

[Ross]

Sounds like deal. Location?

 

[CajunJeff]

Schriever Louisiana, 70395. Close to Thibodaux and Houma.

 

[CajunJeff]

Bump.

 

[Ross]

$1500 including HP Tuners!!! This looks like a good deal for a goblin builder. I'm kind of surprised some new builder hasn't grabbed it yet.

 

[CajunJeff]

I cranked it up and drove it today... Still runs strong. But the longer it sits, the worse shape it's going to be.

 

[Grayson]

Putting out feelers to sell my '06 Redline. It has 175K miles, needs a bunch of little repairs and at this point, I no longer need it. A lot of small interior stuff needs repairs (sunroof gearbox, window clips, headliner is out) but that wouldn't matter to most folks here. Located in south Louisiana.

Car is a competition package car (LSD diff, gray wheels, LED ladder tach, boost gauge). Mechanically, it needs a timing chain set and an alternator. Shifter bushings are pretty worn out. But it still runs and drives perfectly fine. It has GM stage 2 (42#) injectors with the factory tune. Stock pulley, but I have a Billetflow 3.1" pulley I never put on. Has urethane motor/trans mounts. Comes with a copy of HPTuners and the MVPI Pro interface.

Mechanically, it's the same as a Cobalt SS/SC, but the wiring harness is slightly different, so there will likely be some adjustments needed to use the harness in a Goblin. I could sell it on Facebook or something, but it really would be ideal for something like this.

Asking $1500, I'd like to see this go towards someone building something cool than it just getting parted out by a wholesaler.

Hey! I might be interested as Im looking for another engine for my SS/SC. If the engine is good im definitely interested. What adjustments would have to be made for the wiring harness? Just the main harness or the engine harness because I have a main harness from my Cobalt SS/SC already installed

 

[CajunJeff]

Hey! I might be interested as Im looking for another engine for my SS/SC. If the engine is good im definitely interested. What adjustments would have to be made for the wiring harness? Just the main harness or the engine harness because I have a main harness from my Cobalt SS/SC already installed

Gotcha. Check DM's.

 

[Squanch]

****, Really wish this was closer to me but shipping is the same price as you are asking for the car. Good luck with the sale.

 

[CajunJeff]

Bump. Car is still sitting here. Would it be more interesting if I stripped it first, or sold it whole?
Really would like to see someone build a Goblin out of this.