1988 Nissan B12 Sentra sleeper build

[Rttoys]

Nice. Looks good

 

[Goblinfanclub1234]

We have the meats

 

[Goblinfanclub1234]

First time ever finding out if the doors will close with the door bars I guess I did good. I made a crude cardboard template of the door+arm rest during fab because the doors were in a storage unit at the time

 

[Goblinfanclub1234]

anyone else dread the adding fluids stage. its the dealing with leaks phase.

 

[Rttoys]

If there ain’t no fluids, you can’t have a leak

 

[Goblinfanclub1234]

 

[Rttoys]

 

[comegetjoe]

I came across this video tonight. Check out the main prize.

 

[Goblinfanclub1234]

After messing with 2 different sets of injector o-rings that were the wrong size I got the right ones in and have the fuel system set to 60psi. Both the fuel regulator and the Holley fuel pressure sensor are reading the same pressure.

I also had to change the o-ring on the oil pump and now have good oil pressure while cranking.

Also found out the hard way that Holley Terminator X does not like aftermarket crank and camshaft sensors so I am going to swap out for OEM ACDelco parts and try to start it again next weekend. Annoying.

 

[Goblinfanclub1234]

started at the bottom now we're here.

click me

 

[Goblinfanclub1234]

 

[Goblinfanclub1234]

@Desert Sasqwatch

 

[Desert Sasqwatch]

Woo hoo! Time to get some miles on it and get the suspension sorted. I can't wait to see what your time slips show!

 

[Rttoys]

Noice