A Peek Into DF Kit Car

[TheDon]

Awsome

 

[GoblinGal]

What's going on this morning at DFKC? Lots! Moving of chassis' around since 4 went out yesterday via Stewart, we need all the room we can get with all these orders! Keep 'em coming by the way!

In the welding shop we have #269 on the jig, yesterday her pieces were getting laid out & ready for this step. Our jig is a piece of work & good quality! It keeps your chassis stable in the face of pressure, heat, motion, and force. We're able to streamline our welding work by keeping parts together in a vice grip like this. Of course, our great Lead welder, Ray has a lot to do with this too!

We also have 276 almost finished with her turn (pun intended ) on the rotisserie. She's getting her drill holes for attachment points today by our other great welder, Suede.

What are we up to in the Front Office today? Lots of creative juices flowing, keeping up with all your emails, ordering of materials & parts, invoicing & so much more!

Hope our Goblin Family is having a GREAT DAY!

 

[GoblinGal]

Here's #256 getting loaded with her kit contents. She's getting ready to head out as part of SIX scheduled to be picked up by Stewart next week. This is a good representation of what you receive when you order your Goblin kit to be delivered to you all at one time! Packed to the gill with all the kit contents needed for a TC Donor car up in Wisconsin.

How'd YOU like to see this big rig pull up to YOUR door? Watch your neighbors necks turn & your "cool neighbor points" go thru the ROOF!!!

 

[Sparvy]

Here's #256 getting loaded with her kit contents. She's getting ready to head out as part of SIX scheduled to be picked up by Stewart next week. This is a good representation of what you receive when you order your Goblin kit to be delivered to you all at one time! Packed to the gill with all the kit contents needed for a TC Donor car up in Wisconsin.

How'd YOU like to see this big rig pull up to YOUR door? Watch your neighbors necks turn & your "cool neighbor points" go thru the ROOF!!!

Very cool. I think mine is in that group (double roof halo bar #262) and is the last of the 6 being delivered next week. Fingers crossed for good weather since the Stewart Trans guys will be heading from Wisconsin to New Hampshire at the tail end of winter.

 

[phaetonman7]

Just got a call from Stewart that 267 that was picked up yesterday will be delivered tomorrow between 10-noon in Denver.

 

[GoblinGal]

Just got a call from Stewart that 267 that was picked up yesterday will be delivered tomorrow between 10-noon in Denver.

Pics or it didn't happen!

 

[GoblinGal]

Today @ DFKC: It's HUMP DAY!

& we're halfway to the weekend!

Carlos is busy machining parts:

Suede is busy welding fuel tanks together:

#269 is upside down on the rotisserie, something we NEVER want to see happen on the road...Rubber Down Goblin Family!

Have a great day y'all!!!

 

[Vwsaabvt]

View attachment 21375

I like what I'm seeing here, how long until the new upgrade is available to buy

 

[r3drckt]

I like what I'm seeing here, how long until the new upgrade is available to buy

Wait, is this the new rear drive hubs?! To eliminate the bump steer?!

 

[Brett]

Wait, is this the new rear drive hubs?! To eliminate the bump steer?!

I just figured that those were slingshot parts.

 

[GoblinGal]

I just figured that those were slingshot parts.

Ding ding ding....We have a WINNER! Slingshot parts

 

[GoblinGal]

Wait, is this the new rear drive hubs?! To eliminate the bump steer?!

Nope...Slingshot parts

 

[GoblinGal]

I like what I'm seeing here, how long until the new upgrade is available to buy

We're machining slingshot parts today

 

[Fozda]

Today @ DFKC: It's HUMP DAY!

Have a SUPER MAR10 DAY!

 

[GoblinGal]

Keeping you guys on your toes....At least I know you are watching....LOL

 

[phaetonman7]

Pics or it didn't happen!

Stewart transport just left. Said he was taking 2 to Washington and 1 to San Diego. With a stop in between to drop off an air plane.

 

[Towerdog]

Stewart transport just left. Said he was taking 2 to Washington and 1 to San Diego. With a stop in between to drop off an air plane. View attachment 21385View attachment 21386View attachment 21387View attachment 21388View attachment 21389

Looks like a Quicksilver.

 

[GoblinGal]

Morning Goblin Family! How is everyone today? Well, we're on the downslope to the weekend & counting down till Friday. I'm grateful that the cold weather is behind us & Goblin driving weather is upon us!

What's going on @ DFKC today? I'm here answering emails, ordering supplies & doing whatever I can to help out! The guys are all out in the shop (ah, the office is quiet) pretty much busy busy busy with so much going on here, it's great!

Today's photos are of a new shipment of piping going through our bender. We need lots of piping in stock to keep up with all these kits you're buying from us! As soon as a shipment comes in, we start bending & cutting.

Thanks to you, our Goblin Family, we're grateful for you!

 

[Desert Sasqwatch]

It's cold in Phoenix this morning - 43 - so enjoy the warmer weather today, colder weather is coming your way. Sorry.

 

[GoblinGal]

It's cold in Phoenix this morning - 43 - so enjoy the warmer weather today, colder weather is coming your way. Sorry.

Yeah, uh, thanks?

We're 71 now, high of 78 today. Pretty much the same till next week where our highs are expected to be in the upper 60's & morning lows in the upper 40's. I'll take this kind of weather ANY day over what I used to live through when I lived up North!