AIM MXG 1.2 Dash

[socaljeff3798]

Has anyone tried installing a AIM MXG Dash in a Goblin. Expensive but would off the chart on the cool factor.
I wonder what it would take to do it?

 

[ATMironov]

Has anyone tried installing a AIM MXG Dash in a Goblin. Expensive but would off the chart on the cool factor.
I wonder what it would take to do it?

@Brian74 has one installed.
My frame gets delivered this week and I'll be putting one in!
Mostly its plug and play. There are a number of inputs that the MXG can't read though the CAN Bus, so you will need to wire them in with remote inputs.
This is my list of warning lights that will need to be individually wired.

Hazards

Left Turn Signal

Right Turn Signal

Head Light Low Beam

Head Light High Beam

Parking Brake ON

Low Coolant Level

Check Engine Light

I also have 8-10 other sensors that I'll be wiring into the system

 

[socaljeff3798]

Thank you....I really know nothing about them.
Do you have to retain the stock dash?

 

[ATMironov]

No, the MXG will report all the same data as the OEM cluster, so there is no need to keep it.
I did leave the wiring in for the cluster incase I have trouble getting it set up.

 

[socaljeff3798]

Thank you what car number are you?

 

[ATMironov]

Thank you what car number are you?

#280. Should be delivered on Wednesday or Thursday.
I have a lot of custom stuff going on, so its going to take me a little bit to build it.

 

[winddude]

looks very slick!!