V1 INFO/Return button wiring

[Robf]

Looking for some help with the button panel wiring portion.

There was no instructions with the buttons and wires.

According to what I have found on the forum it calls for

Black factory - black button wiring. Ground
Tan factory - brown button. Horn
Whitish factory- white button hazards

Green and white factory - green button and the info button doesn't work

How do I make the information and return work? What am I missing?

 

[Ross]

The 2007 wiring is considered the early model wiring.
You need to find the info return buttons on your wiring harness.

 

[Robf]

Actually the steering wheel that came off the car ended up being late model.

My car was a mix of early snd late model parts. It's been fun. I think I got it figured out. Thanks Ross

 

[snirtman]

The 2007 wiring is considered the early model wiring.
You need to find the info return buttons on your wiring harness.

This should be a huge help, as I was having the same question. I thought I followed the wiring videos pretty closely, but I have only 5 wires set aside for Button Panel, plus a ground I added:

I preserved my info button wires since I don't remember Lonny addressing them in the videos:

I was hoping wiring instructions would be included with the button panel kit, but apparently they aren't. Has anyone done a wiring diagram for the button panel?

 

[Ross]

Button Panel Wiring

Store links: Wiring Harness (with or without buttons) Button Panel Set We received our pre-wired button harnesses. One end matches the wires coming from your dash harness and the other ends are pairs that go to your buttons and already have the correct resistance pre-wired. This makes it...

dfkitcar.com

 

[snirtman]

Button Panel Wiring

Store links: Wiring Harness (with or without buttons) Button Panel Set We received our pre-wired button harnesses. One end matches the wires coming from your dash harness and the other ends are pairs that go to your buttons and already have the correct resistance pre-wired. This makes it...

dfkitcar.com

Thanks Ross!!!

 

[Robinjo]

The 2007 wiring is considered the early model wiring.
You need to find the info return buttons on your wiring harness.

It’s the pink and green that you (should) have knotted together during the harness videos. Here is how I wired it and it all works correctly.

Photos of Back of Button Panel

Thanks everyone, got it installed. Here is my schematic, I also posted it in my build log. Just through I would add it here as well incase someone searches for a remedy to this very issue.

dfkitcar.com

 

[Sluggonaut]

It’s the pink and green that you (should) have knotted together during the harness videos. Here is how I wired it and it all works correctly.

Photos of Back of Button Panel

Thanks everyone, got it installed. Here is my schematic, I also posted it in my build log. Just through I would add it here as well incase someone searches for a remedy to this very issue.

dfkitcar.com

I used labels instead of knots because I watched the video series all the way through before I started and knew I wouldn't remember what all the knotted wires were for at the end. Maybe this is why I don't recall having any difficulties with the panel wiring. It was simply matching colors according to the correct early/late model diagram.

 

[Robinjo]

I was not as smart and didn’t label it. I wish I had….