V1 Justin's City Goblin - 08 LS donor

[jFritzies]

Finally got around to mounting the body panels and hood after painting

 

[GoblinGal]

Finally got around to mounting the body panels and hood after painting
View attachment 29144View attachment 29145

LOVE the color AND your pooch is TOO cute!!!!

 

[bigred]

hey dude, have you got your buggy painted yet?? mine will be here this weekend i believe, i was looking at your wheels, those are badass!, can you tell what backspacing you went with?

 

[jFritzies]

One year anniversary of pulling the motor from the donor and getting it ready for paint! Should have some decent weather up here in Oregon this weekend (nice toasty 65° and sunny) so I’ll be taking the goblin out for its first real weekend drive since getting all the bodywork finalized.

 

[jFritzies]

Just picked up a used turbo off of a 2007 Saturn sky for $165. 80k miles on the turbo with zero shaft play. Couldn’t pass up on the deal so I guess the turbo build is starting sooner than expected. Aiming for for about 200-220whp for the initial build. Stock internals on the 2.2 are weak and shouldn’t exceed 230whp according to ZZP. Might upgrade internals at a later date and aim for 300whp. We will see how it goes!

 

[Rttoys]

Awesome

 

[JBINTX]

Just picked up a used turbo off of a 2007 Saturn sky for $165. 80k miles on the turbo with zero shaft play. Couldn’t pass up on the deal so I guess the turbo build is starting sooner than expected. Aiming for for about 200-220whp for the initial build. Stock internals on the 2.2 are week and shouldn’t exceed 230whp according to ZZP. Might upgrade internals at a later date and aim for 300whp. We will see how it goes! View attachment 30739View attachment 30740

Welcome to the boosted life.
No regrets…….

 

[Aguinaga]

Are these the old ones, from the front that are moved to the back?

 

[jFritzies]

View attachment 31657Are these the old ones, from the front that are moved to the back?

These are new ones that are included in stage 3 I believe. I’m not sure what the part number is but I’ll check later today

 

[r3drckt]

Those look like new ones, but they look like new ones from the front of a cobalt, which move from the front steering rack to the rear toe bar. DF supplies new ones that are shorter that go on the front steering rack (not sure what they are from or what the part number is off hand). DF also supplies the inner tie rods for the rear toe bar.

 

[Rttoys]

Correct r3drckt
New to front, old to back.

I would suggest new ones for the back, because new.

 

[Aguinaga]

Thank you guys. Helps a lot. Sometimes I think I create a scab scratching my head looking at this project sometimes. Haha

 

[r3drckt]

Thank you guys. Helps a lot. Sometimes I think I create a scab scratching my head looking at this project sometimes. Haha

I feel ya. Run out of assembly videos and you start trying to install parts that you end up winging. Bolts are tight, that’s all that matters, right?

 

[Aguinaga]

So what am I missing. Only have one or two threads actually going in before running out? Do I have to buy new bolts?

 

[jayrolls]

So what am I missing. Only have one or two threads actually going in before running out? Do I have to buy new bolts?

I’m pretty sure that there is a new bolt that came with the kit.

 

[Aguinaga]

That is what I thought but it doesn’t have it, or I’m lost in the sauce

 

[Lonny]

I think we have changed the contents of that bag to include more hardware.
Email [email protected] and we can get some bolts headed your way.

 

[Aguinaga]

Thank you Lonny

 

[jFritzies]

Big news. Just got my 2.2/2.4 turbo kit from ZZP. Already ordered wiseco pistons and eagle connecting rods to beef up the internals to withstand the ~300whp I’ll be shooting for. Pistons and rods are back ordered for about a month and I still need to order an upgraded clutch/flywheel as well. Looking to begin the engine build October/November and get it all situated before spring time up here in the PNW. Exciting stuff

 

[Desert Sasqwatch]

Shiny new toys!!!!