V1 Nukers City Goblin - 2009 SS/TC number 2 build

[ncgoblin]

Garage is done, Ready to tear my donor apart and get this sucker GOING!

Nuker-

Did you do the garage yourself? What product did you use?

 

[TheNuker]

Yep, It was really easy. But make sure you grind the sealant off of your existing concrete first.

Took 6 gallons of epoxy 2 coats so 3 2 gallon kits
https://www.epoxysuperstore.com/sto...400-sq-ft-97?zenid=dh5go2b9qaesr0gnkgo1ffqcv2

I also used 2 of these 1.5gallon urethane kits as I wanted a thick clear
https://www.epoxysuperstore.com/sto...500-sq-ft-12?zenid=dh5go2b9qaesr0gnkgo1ffqcv2

Nuker-

 

[TheNuker]

Am I to assume with a new engine/trans I will need to buy parts 6,10,15 in this picture?

Nuker-

 

[Desert Sasqwatch]

If no donor's, yes. Someone may have these leftover? Or the local boneyard.

 

[JBINTX]

yes to 6 and 15.
solid mount replaces 10 if you got that from DF.

 

[JBINTX]

yes to 6 and 15.
solid mount replaces 10 if you got that from DF.

solid mount from DF replaces 14 as well

 

[TheNuker]

Fantastic, Thank you very much. I have the solid mounts so I will order 6 and 15.

Nuker-

 

[TheNuker]

Just got the last of the powder coated parts back that I need to get going. Building will start asap.

Nuker-

 

[TheNuker]

solid mount from DF replaces 14 as well

Any chance you can confirm part numbers I'm pulling GM 25827450 for #6 but the part seems to very different places. Some show that part number as pulling number 10 on the pic above?

Also GM 15854396 seems to pull pictures that look very different too for number 15 on the picture above? Some show 2 holes on top others 3 and look right. Very confusing.

Nuker-

 

[WorkinMan55]

Any chance you can confirm part numbers I'm pulling GM 25827450 for #6 but the part seems to very different places. Some show that part number as pulling number 10 on the pic above?

Also GM 15854396 seems to pull pictures that look very different too for number 15 on the picture above? Some show 2 holes on top others 3 and look right. Very confusing.

Nuker-

I have a spare #6 with bolts if you want it.
#15 has three holes in the side and three threaded holes in the top.

 

[JBINTX]

Any chance you can confirm part numbers I'm pulling GM 25827450 for #6 but the part seems to very different places. Some show that part number as pulling number 10 on the pic above?

Also GM 15854396 seems to pull pictures that look very different too for number 15 on the picture above? Some show 2 holes on top others 3 and look right. Very confusing.

Nuker-

Sorry, I am no help here.
Maybe @Lonny might be able to help?

 

[TheNuker]

Brother and I got hoses pulled and floor installed today! Really digging the diamond plate.

Nuker-

 

[Desert Sasqwatch]

Oooh! Shiny!

 

[TheNuker]

Got some more progress done today!

 

[JBINTX]

I can only imagine how much easier the second one is compared to the first!

 

[TheNuker]

Does anyone know if I actually need this part, or can I screw an AN fuel line directly to the fuel rail?

thanks,
Nuker

 

[George]

It is a pulse dampner.

Brad

 

[JBINTX]

I thought that was the part that stopped the surges from the fuel pump and evened out the flow?

 

[G Atsma]

I thought that was the part that stopped the surges from the fuel pump and evened out the flow?

You have just described a pulse dampener.

 

[TheNuker]

Okay so I guess I need that, I'll just buy the AN fitting to fuel rail adapter.

Thanks!
Nuker-