Part of the Reese Hitch Gang

[Zoom Zoom]

Well I didn’t have time to weld one on so I took the one of my fifth wheel bumper that I use to haul my kayak and chopped it up to fit , Then I had to take the tow adapters off of the red goblin and put on the green one. I was in a hurry because I wanted to tow the cars to cars and coffee this morning and I just found out about 3 days ago. So when I took the tow hooks off the red to green one I put them on the shock mounts instead of the A arm so I had to redo it all. Now I need to get another set of tow hook up and bolts to put back on the red goblin. I have a 15 before I need to leave for cars and coffee.

 

[Rttoys]

 

[Rttoys]

Pretty cool

 

[JBINTX]

Charles you are a trailblazer!!!!
If DF does not put that pic on their website, they are missing out……..

 

[Zoom Zoom]

View attachment 28680

That’s cute

 

[Rttoys]

That’s cute

I wasn’t sure if anyone would get it.

 

[Kyle]

Well I didn’t have time to weld one on so I took the one of my fifth wheel bumper that I use to haul my kayak and chopped it up to fit

Would you be willing to provide more details on this? I would love to be able to hook up a light trailer to my Goblin and this looks like it might be a great option.

I have a trailer that I use for my dirt bike that I would like to pull every now and again.

 

[Zoom Zoom]

Would you be willing to provide more details on this? I would love to be able to hook up a light trailer to my Goblin and this looks like it might be a great option.

I have a trailer that I use for my dirt bike that I would like to pull every now and again.

I got the hitch from E-trailer for my fifth wheel bumper 4X4 SIZE and needed it for my goblin so off it come and I cut about 2 “ off and had to grind the back off the Reece hitch down quite a bit so it wouldn’t hit the tie rod stabilizer bar that it backs up to .
Then just drilled a couple new holes and tighten it down . Make sure to get the 4X4 one not the 4X2 one it’s not wide enough !
In the picture you just mount it the opposite the hitch up top or it will be to low like they have it .

 

[Sluggonaut]

I got the hitch from E-trailer for my fifth wheel bumper 4X4 SIZE and needed it for my goblin so off it come and I cut about 2 “ off and had to grind the back off the Reece hitch down quite a bit so it wouldn’t hit the tie rod stabilizer bar that it backs up to .
Then just drilled a couple new holes and tighten it down . Make sure to get the 4X4 one not the 4X2 one it’s not wide enough !
In the picture you just mount it the opposite the hitch up top or it will be to low like they have it .

I can see the part of the rear bracket was cut off, but did you have to remove material from the receiver tube as well on the rear?

I hadn't seriously considered a trailer hitch previously, but then realized I could attach a bike rack or build a rack to tote some golf clubs. I wasn't sure I wanted a permanent solution so this would be perfect, just concerned about how secure this is and if it works well.

 

[Zoom Zoom]

Yes I did need to remove some up the material on back it’s a tight fit and it’s very secure.