V1 Side Mirrors / Turn Signals

[Ross]

Any suggestions on a set of side mirrors for the Goblin? I noticed that the mirrors sometimes get kicked as people enter/exit the car, so they are subject to a bit of abuse that can easily leave them broken or loose. I was hoping to find some that can stand up better to the accidental bumps.

 

[BaltimoreHokie]

Pretty sure the current mirrors are cbr 1000 mirrors fro Honda motorcycle. I'm pretty sure they should be able to fold in and take a bit of abuse...but. I don't have a pair yet...

 

[Karter2026]

These are the ones I got.

Amazon.com: Motorcycle Side Wing LED Brinker Turn signal Light Compatible with Honda CBR 125R 250R 600RR 1000RR Yamaha FZ1 FZ6 YZF R1 Suzuki Sport Bike(Clear Lens): Automotive

Amazon.com: Motorcycle Side Wing LED Brinker Turn signal Light Compatible with Honda CBR 125R 250R 600RR 1000RR Yamaha FZ1 FZ6 YZF R1 Suzuki Sport Bike(Clear Lens): Automotive

www.amazon.com

The base was a little different than the mount opening on the chassis. If I had my 3d printer at the time I would of made some spacer / adapters. So before I painted I welded up the holes ground them flat and just drilled for the mirrors. They seem pretty solid once I snugged up the pivot bolt. And if they get broken they are cheap to replace.

 

[Christopher Sanchez]

I went with some Chinese gsxr but had to buy two pair of headlight block off plates and sandwiched on the mounting bracket, worked for me.

 

[ManDan1957]

I found these for 40 bucks Canadian. They are different than anything else I’ve seen.