V1 subframe 5/8" carriage bolt length?

[ColoradoCryptoTrader]

I am missing the carriage bolts for the sub frame that bolt up by the coolant hoses.

Can someone please post up the total length of the 5/8"-11 carriage bolts so I can pick some up locally?

Thanks!!

 

[Desert Sasqwatch]

If these are missing from your kit, send a message or call DF to get a set. These need to be graded bolts, since they 2 of only 4 bolts that hold the subframe to the chassis.

 

[ColoradoCryptoTrader]

If these are missing from your kit, send a message or call DF to get a set. These need to be graded bolts, since they 2 of only 4 bolts that hold the subframe to the chassis.

alright I will talk to DF about it. I am seeing that the 18-8 stainless steel 5/8" bolts I found on boltdepot.com have a yield strength of 65,000psi and a tensile strength of between 100,000 and 150,000psi I think I should be good here. I bet you I could crash my goblin off of the top of Pike's peak and those bolts will still be holding lol.

 

[Lonny]

The bolt we use there are nothing special. We needed to use a 5/8 bolt because of the OEM hole diameter in the subframe. It is a little overkill for it's purpose. If you can't find any locally let us know and we can ship you some.