V1 Aaron Buley's Street (Extended) Goblin #136 - 09 SS/TC donor

[aaronbuley]

Not needed, correct?
I’m cutting them off!!

 

[aaronbuley]

What is this for?

 

[Waterdriver]

Not needed, correct?
I’m cutting them off!!

ABS wheel speed sensors leads. "Snip!"

 

[Waterdriver]

What is this for?

Looks familiar? Can you turn the connector to see the colors of wires going to it. It will help identify it.

 

[aaronbuley]

Looks familiar? Can you turn the connector to see the colors of wires going to it. It will help identify it.

here ya go. thanks! sorry it loaded the pic upside down.

 

[Waterdriver]

I think that's for the car remote module.

 

[aaronbuley]

I seem to have lost that. Guess it’s not needed though yeah?

 

[Briann1177]

You don't really need the door lock receiver. I kept mine for the tire pressure sensors. Up to you.

 

[aaronbuley]

Can you show the receiver from a different angle?

 

[aaronbuley]

Oh snap!! All the grounds finally connected. I have fuel pump flowing and all the dash lights.

I just attempted to crank it and the fuel line disconnected and started spraying.

Ok, reconnected fuel line. Everything lights up.
.... engine still won’t turn over.

I’m gonna get this before the weekend is up.

 

[grantcropper]

Aaron, I just stayed up late to watch your entire build to this point. GREAT WORK, it is putting the fire in me to get my engine running. I hope to see a running car by tomorrow!

 

[ctuinstra]

Aaron, did you get your engine started yet. When you do, let us know why it didn't. I need to update my posts of what to do if it doesn't start. It was meant for all the reasons why a car won't start. Since then the reason have been all over the place and not typical. Good luck!

 

[aaronbuley]

Aaron, did you get your engine started yet. When you do, let us know why it didn't. I need to update my posts of what to do if it doesn't start. It was meant for all the reasons why a car won't start. Since then the reason have been all over the place and not typical. Good luck!

Not yet. Hoping to figure it out today and will talk about it in my build video for this week too. But I’ll absolutey let you know!

 

[aaronbuley]

I’m an idiot and threw away my original shifter cable mount. Anybody have an extra or a trusty link to buy one?

 

[Briann1177]

The one on the transmission?

Shifter Cable Mount

It appears as if I'm missing some kind of bracket here? Whatever goes there, I definitely don't have it anymore. Any idea where I can find one? Here's a pic from Rich's build:

dfkitcar.com

 

[ctuinstra]

I’m an idiot and threw away my original shifter cable mount. Anybody have an extra or a trusty link to buy one?

Are you talking about this piece? If so, you don't need it. The kit comes with a different mount. This one picture is not used.

 

[aaronbuley]

Oh Lonny was saying I need the lower portion of it. No?

 

[Ross]

Oh Lonny was saying I need the lower portion of it. No?

The black bracket is the lower part of it. The white parts are my own engineering, but both ways need the lower black bracket.

 

[askiles]

Oh Lonny was saying I need the lower portion of it. No?

You are correct, you do need the lower portion of the bracket. Then the DF provided bracket bolts to that.

 

[aaronbuley]

Just a note for people trying to sell their parts, try Facebook Marketplace if you haven’t already. I had been trying to use craigslist only but still had some things I needed to get rid of. I posted my seats, rotors and Brembo brakes (all separate entries) from the donor and sold them all in the same day.
Give it a shot!