V1 Help Front Control Arms

[Adam in CLE]

All,

Front Control Arms aren't fitting or lining up. I have .5" of space between the arms and frame mount. Can't bend the I tried. Seems the jig maybe off...? Could use help on the following. Can someone send me pics of their install? How was your fitment? I am Leary to crank the bolts down to move the tubular arms for fear of sprung weight on them and cracking the powder coat. Trying to see if arms are off or frame mount is off. Picture is 1 side. Ut both are the same as far as being off and the driver side bolt hits the power steering rack.

 

[JBINTX]

Tighten the nut / bolt. It will go into the correct position.

 

[Adam in CLE]

Thank, will try.

 

[Adam in CLE]

Do you have any pics of the front suspension setup that you can send?

 

[JBINTX]

Do you have any pics of the front suspension setup that you can send?

I assume you have watched all the videos? What details specifically are you unsure of?

 

[Adam in CLE]

I thought I had. Did I miss one that shows the front suspension being put on?

 

[Adam in CLE]

Crap, just looked at the archived videos and found what you were referencing. Thanks for pointing out. I was only looking at the latest videos.

 

[Sluggonaut]

Crap, just looked at the archived videos and found what you were referencing. Thanks for pointing out. I was only looking at the latest videos.

I never knew the archived ones were there either and they answered a lot of questions when I found them.