Goblin Front Splitter Group buy

[RITDR]

I’m in for an Intercooler version.

 

[Jareth]

Please include me for a Intercooler version.

 

[Spague]

I would like a non - intercooler version please

 

[KSLunsfo]

I've had plans for a front wing forever now, but seeing as that keeps getting put off...

Add me in for an intercooler version (with opening).

By the way, how many existing bolt points does this plate utilize? I will likely do something a little different up front including adding a single center hole to give access to the single bolt/nut that's holding the nose of my hood down. My hood concept hinges backwards via the original 2 rear mount points.

 

[ncgoblin]

I have converted to turbo so please include me on the list for no opening non-intercooler version.

Thanks!

 

[KSLunsfo]

I have converted to turbo so please include me on the list for no opening non-intercooler version.

Thanks!

So, you aren't running a front heat exchanger for your turbo setup?

 

[ncgoblin]

So, you aren't running a front heat exchanger for your turbo setup?

Correct I am using Air-to-Air cooler in rear.

 

[Rttoys]

By the way, how many existing bolt points does this plate utilize? I will likely do something a little different up front including adding a single center hole to give access to the single bolt/nut that's holding the nose of my hood down. My hood concept hinges backwards via the original 2 rear mount points.

Since it will come blank, you can do whatever you like, but I instruct people to line up the frame/body with the splitter, then use the radiator support bolts as your main mounting point. From there, 2 bolts where the “firewall” meet the floor makes it plenty secure. It still seems like it needs support up front and there are many ways to do that using some brackets, cables or rods. The options are up to you

 

[KSLunsfo]

Since it will come blank, you can do whatever you like, but I instruct people to line up the frame/body with the splitter, then use the radiator support bolts as your main mounting point. From there, 2 bolts where the “firewall” meet the floor makes it plenty secure. It still seems like it needs support up front and there are many ways to do that using some brackets, cables or rods. The options are up to you

Cables / rods are what I'm leaning towards to enable opening the hood without having to remove the splitter.

 

[Matt3458]

I’m in for an Intercooler version.

 

[CCascioli]

Sign me up for a Non-Intercooler version

 

[WA08TC]

Work cut out for you. Seems like a lot of people want one.

 

[Rttoys]

I text him today that it looks like he has about 20 to make after vacation. And owes me a few cigars.

 

[RBikeMan]

Hi this is Vince #415 ss/sc in knoxville. I will take one with the heat exchanger cut out. Thanks!!

 

[Markm]

I would like to get one of these also with heat exchanger cut-out. Thanks

 

[Zacm829]

Put me down for an intercooled version! Let me know when the order form comes out. Hope I made the order deadline.

 

[Rttoys]

Yall will be alright. He won’t start them for a week or so.

 

[jirwin]

I've been waiting for him to post a link to order

 

[Desert Sasqwatch]

I thought he was taking orders with the responses to this posting?

 

[Gtstorey]

He said he was going to provide an online ordering ability.