-
We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.
V1 Rear wing recommendations
JBINTX
Goblin Guru
- JBINTX Goblin Guru
The first is the evap. If your state does not do emission inspections, you can delete that line as well as the little solenoid is is connected to. Just bolt a flat plate in its place.
The second fitting runs through a check valve to brass fitting next to the MAF sensor.
OptimizePrime
Goblin Guru
- OptimizePrime Goblin Guru
OptimizePrime's Build | '10 SS/TC #168 | Registered
OK now that I have these electrical issues out of the way, let's rewind and catch up to speed. From the beginning I knew I didn't want to reuse the stock seats, and I'm too much of a masochist to purchase the DF Corbeau seat brackets to make life easy. What that meant is that I effectively had...
You don't have to do a catch-can here, as it doesn't do much. What you can do is put a little breather filter on #2 and cap the turbo inlet.
Kenny123
Well-Known Member
- Kenny123 Well-Known Member
Beautiful!! I was contemplating a Catch can but I just wasn't sure that it was necessary so ill just go without for now. I appreciate the help and the picture. Makes it so much easier.
OptimizePrime's Build | '10 SS/TC #168 | Registered
OK now that I have these electrical issues out of the way, let's rewind and catch up to speed. From the beginning I knew I didn't want to reuse the stock seats, and I'm too much of a masochist to purchase the DF Corbeau seat brackets to make life easy. What that meant is that I effectively had...dfkitcar.com
You don't have to do a catch-can here, as it doesn't do much. What you can do is put a little breather filter on #2 and cap the turbo inlet.
JBINTX
Goblin Guru
- JBINTX Goblin Guru
Kenny: If you want to inform yourself a little more to make a decision on the valve cover vacuum, read through this thread:
dfkitcar.com
oil separator
So there are plenty of references to the build up of carbon and gunk on the intake valves. Several videos are available about walnut blasting and such. Of course, the emission restrictions drove many of the systems that did not exist on engines years ago. I think we are all deleting the EVAP...
Oldchevyguy
Well-Known Member
- Oldchevyguy Well-Known Member
Just my $.02. Why pay HUNDREDS of dollars for a carbon fiber wing on a, let's face it, economy hot car.??. I payed about $60 for an aluminum 2 blade one from ebay, and I think it looks great. Of course I bought the DFG uprights to make it work.
Oldchevyguy
Well-Known Member
- Oldchevyguy Well-Known Member
My point for those contemplating a build, or just starting is that you dont need to spend a fortune on a rear wing. It's really more cosmetic than functional on these cars.
